Definition
A pressure vessel is a closed container designed to contain gases, liquids, or two-phase fluids at operating pressures substantially above or below atmospheric pressure. ASME Section VIII applies to vessels operating above 15 psig and meeting specified volume and diameter minimums. Pressure vessels span an enormous range of applications: accumulator tanks, heat exchanger shells, distillation columns, process reactors, storage spheres, and nuclear containment vessels. The applicable code, material selection, design pressure, temperature, and fluid service define the fabrication requirements and the resulting vessel qualification.
Pressure vessels are among the highest-consequence process equipment items because failure can be catastrophic. Code compliance, third-party inspection, and proper certification are not administrative requirements — they are the documented evidence that structural integrity has been engineered and verified. Buyers who specify pressure vessels without defining the applicable code, design conditions, and NDE scope expose their projects to significant cost and schedule risk.
MRX's core fabrication capability is custom ASME pressure vessels across the C1 cluster: process vessels, heat exchanger shells, reactors, nuclear-adjacent BOP pressure components, deaerators, and specialty containers. Standard shop capabilities include carbon steel, 304/316L stainless, duplex stainless, and selected high-alloy vessels from small diameter through large production vessels.
“Any tank under pressure is a pressure vessel subject to ASME Section VIII.”
ASME Section VIII has minimum thresholds (15 psig, 6 inches inside diameter, and minimum volume). Tanks below these thresholds are governed by different standards depending on jurisdiction and service.
“A pressure vessel certification lasts indefinitely.”
Vessels are re-inspected at intervals specified by the applicable jurisdiction. Some jurisdictions require periodic hydrostatic retesting or internal inspection at defined intervals.
Pressure Vessels, Tanks & Reactors — MRX
MRX pressure vessel fabrication capabilities and product overview
Pressure Vessel Buyer's Guide
Full procurement guide for buyers specifying custom pressure vessels
Pressure Vessel vs. Tank vs. Reactor
Explains the differences between vessel types and when each classification applies
Vessel Configurator Tool
Interactive tool for scoping pressure vessel design parameters
MRX Manufacturing is a custom industrial fabricator based in Canby, Oregon. Talk to our engineering team about your project scope.