Home/Glossary/Feedwater Heater
Pressure Vessels / Section VIII / Piping / Nuclear-Adjacent

Feedwater Heater

Definition

A feedwater heater is a shell-and-tube heat exchanger in which boiler feedwater (on the tube side) is heated by steam extracted from a turbine or process steam source (on the shell side). The extracted steam condenses against the tube bundle, transferring its latent heat to the feedwater. Open feedwater heaters allow direct mixing of extracted steam and feedwater; closed feedwater heaters maintain the two streams in separate circuits separated by tube walls. Feedwater heaters are a key component in Rankine cycle efficiency improvement — preheating feedwater reduces the heat input required in the boiler for a given steam output.

Why It Matters in Practice

Feedwater heating reduces fuel consumption by recovering heat that would otherwise be rejected in a condenser. In industrial boiler plants, even a modest feedwater temperature increase (20–40°F) produces meaningful fuel savings over a year of continuous operation. Feedwater heaters also reduce thermal shock to the boiler from cold water injection, extending boiler life and reducing thermal fatigue cracking risk.

Where It Shows Up in MRX Work

Feedwater heaters are shell-and-tube pressure vessels fabricated to ASME Section VIII, with the additional complexity of steam-side nozzle geometry, tube bundle design for appropriate approach temperature, and condensate drain configuration. MRX fabricates custom feedwater heaters and heat exchanger assemblies as part of custom plant equipment packages.

Common Buyer Misunderstandings

✕

“Feedwater heaters and economizers serve the same function.”

✓

Feedwater heaters use extracted or process steam (latent heat transfer) to preheat feedwater. Economizers use hot flue gas from the boiler stack (sensible heat recovery). Both preheat feedwater but through entirely different heat sources and mechanisms.

✕

“Feedwater heaters are only relevant to large power plants.”

✓

Industrial-scale feedwater heaters appear in any plant with significant steam demand — chemical plants, food processing, pharmaceutical manufacturing, institutional cogeneration systems.

Related Terms

Related Resources & Pages

Working on a project that involves Feedwater Heater?

MRX Manufacturing is a custom industrial fabricator based in Canby, Oregon. Talk to our engineering team about your project scope.