Home/Glossary/Deaerator
Pressure Vessels / Section VIII / Piping / Nuclear-Adjacent

Deaerator

Definition

A deaerator is a direct-contact heat exchanger and pressure vessel used in steam-generating systems to remove dissolved non-condensable gases — primarily oxygen and carbon dioxide — from boiler feedwater. Heating the feedwater to saturation temperature at the deaerator operating pressure drives dissolved gases out of solution, where they are vented to atmosphere. Deaerators operate at pressures from 5 to 15 psig in most industrial applications. The two primary types are tray deaerators (feedwater cascades over trays for improved gas stripping) and spray deaerators (feedwater is atomized into steam).

Why It Matters in Practice

Dissolved oxygen causes severe pitting corrosion in boiler tubes, steam mains, and condensate return systems. Even small concentrations — fractions of a part per million — cause accelerated metal loss that shortens boiler life and increases maintenance cost. Deaeration is the primary mechanical oxygen removal method; chemical oxygen scavengers are typically used as a secondary measure downstream of the deaerator rather than as a substitute for it.

Where It Shows Up in MRX Work

Deaerators are ASME Section VIII pressure vessels requiring the same code documentation, NDE, and hydrostatic testing as other pressure-retaining vessels. MRX fabricates custom deaerator vessels and storage sections for industrial steam plant applications.

Common Buyer Misunderstandings

✕

“Deaerators are only needed in large power generation plants.”

✓

Deaerators are used in industrial steam systems across food processing, pharmaceutical manufacturing, chemical plants, and institutional heating — anywhere corrosion from dissolved oxygen is a concern.

✕

“Chemical oxygen scavengers are sufficient without a deaerator.”

✓

Chemical scavengers are a secondary measure. A deaerator removes the bulk of dissolved oxygen mechanically; scavengers handle residual traces. Relying only on chemicals increases chemical cost and provides less reliable protection.

Related Terms

Related Resources & Pages

Working on a project that involves Deaerator?

MRX Manufacturing is a custom industrial fabricator based in Canby, Oregon. Talk to our engineering team about your project scope.