Home/Glossary/Lauter Tun
Food / Dairy / Beverage / Brewery

Lauter Tun

Definition

A lauter tun is a large-diameter, relatively shallow vessel used after the mash tun in brewery production. Its function is to separate the sugar-rich liquid wort from the spent grain (draff) through a combination of gravity filtration through the grain bed and controlled sparging — rinsing the grain bed with hot water to extract residual sugars. The vessel contains a perforated or slotted false bottom suspended 10–20mm above the true vessel bottom, through which wort drains while grain solids remain above. A motorized rotating rake mechanism cuts channels in the compacting grain bed to maintain drainage rate and wort flow. Wort is collected in the underbottom space and exits through multiple collection ports to the wort receiver or kettle.

Why It Matters in Practice

Lauter tun performance directly determines wort clarity, collection time, and extraction efficiency — three parameters that affect both beer quality and brewery throughput. A poorly designed false bottom (incorrect slot width for the malt grist) or a rake mechanism with insufficient penetration or speed control creates stuck lauters, poor wort clarity, and production schedule disruption. Lautering time is typically the rate-limiting step in a traditional mash-lauter-kettle brewery, making lauter tun design the primary throughput bottleneck to address in capacity planning.

Where It Shows Up in MRX Work

MRX fabricates custom lauter tuns as ASME or non-code sanitary vessels depending on customer specifications and jurisdictional requirements. Lauter tun scopes require coordination with the brewery process engineer on false bottom slot width, rake arm geometry, sparge arm coverage, and drive system selection. Two-story configurations — where the lauter tun is elevated above the whirlpool or kettle — require structural engineering for the vessel support system.

Common Buyer Misunderstandings

✕

“A lauter tun is simply a large tank with a filter screen.”

✓

Lauter tuns require dimensional precision (false bottom levelness within ±2mm), mechanical precision (rake arm geometry, drive speed control), and process engineering (slot width matched to malt crush size, sparge arm coverage) that standard tank fabrication does not address.

✕

“Lauter tun size is determined by batch volume alone.”

✓

Lauter tun diameter is determined by grain bed surface area required for the lautering rate — the relationship between wort flow per unit area and grain bed compaction. Volume follows from diameter and depth constraints, not the other way around.

Related Terms

Related Resources & Pages

Working on a project that involves Lauter Tun?

MRX Manufacturing is a custom industrial fabricator based in Canby, Oregon. Talk to our engineering team about your project scope.