Home/Glossary/CIP (Clean in Place)
Food / Dairy / Beverage / Brewery

CIP (Clean in Place)

Definition

Clean in place (CIP) is a validated cleaning methodology in which cleaning and sanitizing solutions are circulated through closed process equipment at defined temperature, flow velocity, and concentration — without manual disassembly. A standard CIP sequence typically includes: a pre-rinse with water, a caustic wash cycle (typically 1–2% NaOH solution at 75–85°C), an intermediate rinse, an acid rinse (for dairy applications to remove mineral scale), a final water rinse, and optionally a steam or chemical sanitization step. CIP is the primary cleaning method in dairy, beverage, pharmaceutical, and bioprocessing manufacturing and is a regulatory expectation for cGMP-regulated food and pharmaceutical facilities.

Why It Matters in Practice

CIP effectiveness depends on achieving sufficient mechanical force (flow velocity creating turbulent flow at the equipment surface), chemical concentration, temperature, and contact time — the TACT factors. A CIP system that achieves these parameters on all product-contact surfaces in every cleaning cycle is the foundation of hygienic manufacturing. Cleaning validation demonstrates that the CIP protocol reliably achieves the required surface cleanliness, which is a regulatory prerequisite for validated pharmaceutical products and best practice for food and dairy operations.

Where It Shows Up in MRX Work

CIP readiness is a design criterion that MRX builds into every sanitary and high-purity fabrication scope. Dead-leg elimination, spray ball positioning, drain slope, and surface finish are engineering inputs that determine whether a tank can be effectively CIP cleaned — not features added after design is complete.

Common Buyer Misunderstandings

✕

“Any sanitary tank can be CIP cleaned.”

✓

CIP effectiveness depends on tank geometry. Dead legs where cleaning solution cannot reach, insufficient drain slope, and improperly positioned spray balls will prevent complete cleaning regardless of the CIP recipe used.

✕

“CIP is just a rinse cycle — it does not require validation.”

✓

In FDA-regulated pharmaceutical manufacturing, CIP cleaning is a validated process with documented acceptance criteria. Failure to validate cleaning is a common FDA warning letter finding.

✕

“More caustic concentration in the CIP cycle compensates for poor tank geometry.”

✓

Chemical concentration cannot substitute for mechanical contact — areas that the cleaning solution does not reach will not be cleaned regardless of chemical strength.

Related Terms

Related Resources & Pages

Working on a project that involves CIP (Clean in Place)?

MRX Manufacturing is a custom industrial fabricator based in Canby, Oregon. Talk to our engineering team about your project scope.