Pharmaceutical · Biotech · Personal Care
High-Purity Process Systems
ASME BPE-compliant fabrication for pharmaceutical, biotechnology, and regulated personal care manufacturing — bioreactors, WFI storage, sanitary mixing vessels, CIP/SIP skids, and sterile transfer systems. Built to tight tolerances with full documentation in Canby, Oregon.
What We Build
Equipment for Regulated High-Purity Applications
Every system is fabricated in-house to ASME BPE standards with full documentation. No outsourced fabrication, no subcontracted welding.
Bioreactors & Fermenters
Stirred-tank bioreactors, airlift fermenters, and cell culture vessels from 50 L pilot scale to 20,000+ L production scale. ASME BPE-compliant with steam-jacketed, direct-sparger, or overlay sparging configurations.
WFI Storage & Distribution
Water for Injection storage tanks with slope-to-drain design, 316L electropolished interiors to Ra ≤ 0.25 µm, and recirculating distribution systems. Designed to meet USP <1231> and Ph. Eur. 0169 requirements.
Sanitary Mixing Vessels
Jacketed, agitated mixing vessels for buffer preparation, media formulation, CIP solutions, and bulk API blending. Orbital-welded internals, zero-dead-leg nozzle placement, and full riboflavin testing available.
CIP / SIP Skid Systems
Complete Clean-in-Place and Steam-in-Place skid systems with ASME-coded pressure vessels, UL-Listed controls, and automated sequencing. Designed for validated cleaning cycles with conductivity and temperature verification.
Sterile Transfer Systems
Sterile transfer assemblies, hold tanks, and manifold skids for aseptic processing. N₂-blanketed configurations with 0.2 µm bioburden filters and ASME BPE SF1/SF4 surface classification at all connections.
High-Purity Heat Exchangers
Shell-and-tube and plate-frame heat exchangers with pharmaceutical-grade surface finishes for product heating, cooling, and condensation in validated processes. Full MTR traceability on all pressure-retaining material.
Why MRX
Built to the Standard Regulators Expect
High-purity fabrication is a discipline of elimination — eliminating stagnant zones, unverified welds, untracked material, and undocumented decisions. MRX applies strict process discipline at every stage.
100% Borescope-Inspected Welds
All internal orbital TIG welds are borescoped and documented. No blind welds in product-contact areas.
Ra ≤ 0.5 µm Electropolished Interiors
Standard product-contact surfaces at Ra ≤ 0.5 µm. WFI and aseptic service available to Ra ≤ 0.25 µm with surface maps.
Zero-Dead-Leg Design
All nozzle placements, tees, and branch connections designed to eliminate stagnant zones per ASME BPE GR-3 guidance.
Full Material Traceability
Mill certifications to final vessel — heat number, lot, cert on every pressure-retaining component. NACE-compliant traceability available.
Standards & Certifications
Bioprocessing Equipment
Weld, surface finish, and dimensional standards for pharma-grade vessels
U / UM Stamp
Code-stamped vessels with U and UM certification from our Canby, OR facility
Sanitary Design
3-A SSI-compatible material, surface finish, and drainage geometry for food-grade compliance
cGMP-Compatible
Designed for cGMP environments — not an FDA-certified facility; clients confirm regulatory fit
Validation Support
IQ/OQ/PQ documentation packages; engineering drawings and material certifications provided
Passivation
Citric acid or nitric acid passivation per ASTM A967 on all product-contact stainless
Industries Served
Who Uses MRX High-Purity Systems
Knowledge Center
Technical Resources — High-Purity Cluster
Related Product Lines
FAQ
Common Questions About High-Purity Fabrication
High-Purity / GMP / Bioprocessing Cluster
Technical Resources in This Cluster
Technical Guide
High-Purity Process Systems: cGMP, ASME BPE & Bioprocessing
Specification Guide
Sanitary Mixing Tanks: Surface Finish & Specification Guide
Comparison Guide
Sanitary Tank vs. High-Purity Process Vessel: What Changes in GMP
Case Study
High-Purity Bioreactor Vessel — Biopharmaceutical Manufacturer
Comparison Guide
Pressure Vessel vs. Tank vs. Reactor: How to Specify the Right System
Buyer's Guide
Pressure Vessel, Tank & Reactor Buyer's Guide
Ready to Specify Your High-Purity System?
Talk with MRX about your process requirements, surface finish needs, documentation expectations, and regulatory context. We'll help define the right system from engineering through fabrication and delivery.