Case Study
Canada — Regulated Extraction Systems

Case Study:
Custom Hydrocarbon Cannabinoid
Extraction System
for a Publicly Traded Canadian Operator

MRX designed and built a large-scale custom hydrocarbon extraction system for a publicly traded Canadian operator — scheduled for installation in Q4 2026 and intended, upon final installation and accreditation, to become the largest CRN-accredited GMP extraction system in Canada.

Publicly

Traded Operator

Canadian market — confidential

Q4 2026

Installation

Scheduled deployment in Canada

CRN / GMP

Accreditation Path

Targeted upon final installation

Largest

Intended Designation

Expected upon final accreditation

The Challenge

Large-Scale Extraction in a Regulated Environment Is an Engineered System Program

Large-scale extraction projects in regulated environments require much more than equipment fabrication. They require engineering discipline, system integration, documentation awareness, practical manufacturability, and alignment with the standards and approval pathways that shape the final deployment.

MRX was engaged to build a custom hydrocarbon cannabinoid extraction system for a publicly traded Canadian operator. The project was significant not only because of its scale, but because it was designed for a regulated Canadian environment. It is being installed in Q4 2026 and, upon final installation and accreditation, is intended to become the largest CRN-accredited GMP extraction system in Canada.

Large-scale custom system

System scale, complexity, and deployment ambition beyond what catalog equipment can support.

CRN/GMP regulated context

Canadian regulatory environment requiring documentation discipline and accreditation-aware engineering.

Publicly traded operator

Customer context requiring engineering quality, execution reliability, and professional delivery discipline.

Major Canadian deployment

Cross-border project requiring alignment between US fabrication capability and Canadian deployment requirements.

Documentation-aware execution

Fabrication and engineering records built to support the accreditation pathway from the start.

Q4 2026 installation target

System designed, built, and delivered to support a defined installation schedule in Canada.

Key Takeaway

At this scale and in this regulatory context, the system must be engineered — not assembled. The design decisions, fabrication discipline, and documentation practices established before the first weld are what determine whether the final installation can achieve the accreditation it is designed for.

Project Context

A Publicly Traded Canadian Operator — Major Regulated Extraction Deployment

The customer required a large-scale extraction system capable of supporting a major Canadian deployment in a regulated operating environment. The project called for more than a standard extractor package — it required an engineered-system mindset that considered system scale, fabrication and delivery discipline, regulatory and documentation awareness, process-system integration, manufacturability, and installation planning.

At this level, the project needed to be treated as a major engineered manufacturing program — not a standard equipment order. The customer's context as a publicly traded operator further required execution quality and delivery reliability consistent with the significance of the deployment.

Engagement Profile

CustomerPublicly traded Canadian operator (confidential)
LocationCanada
System typeCustom hydrocarbon cannabinoid extraction system
InstallationQ4 2026 (scheduled)
Accreditation pathCRN-accredited GMP extraction system
Intended statusLargest CRN-accredited GMP extraction system in Canada — upon final installation and accreditation

The Engineering Problem

Defining and Fabricating a System Where Execution Quality Is Everything

The challenge was not simply building extraction equipment. It was defining and fabricating a system at a scale and complexity level where execution quality, documentation awareness, and system architecture all mattered — and where shortfalls in any of those dimensions would affect the accreditation pathway and deployment timeline.

This is where the project became much more than a fabrication job. It became a full-scale engineered extraction-system challenge — one that required understanding the regulatory context, building documentation discipline into the fabrication process, and delivering a system that could support a major regulated-environment installation rather than just a conceptual prototype.

The project needed to account for:

Custom extraction-system design at a scale beyond catalog configurations
Large-scale process architecture requiring integrated system thinking
Canadian regulated-environment expectations — CRN and GMP context
Mechanical and fabrication execution to the standard a major installation demands
Documentation awareness — material traceability, fabrication records, accreditation support
Practical support for the customer's broader installation and deployment planning
Engineering and fabrication coordination capable of delivering on a defined timeline

MRX Approach

Design-Build Extraction System Program — Not a Standard Equipment Order

MRX approached the project as a design-build extraction-system program. The focus was on delivering a custom system around the application and deployment objective — rather than forcing the project into a standard equipment template that would not serve the scale, the regulatory context, or the installation ambition.

As a GMP equipment manufacturer, MRX brought engineering and fabrication discipline to a project where those qualities directly determined whether the delivered system could support its accreditation pathway. Engineering and fabrication managed in-house in Canby, Oregon — providing the coordination and traceability that a major regulated-environment program requires.

Key priorities in MRX's approach:

Align system design with the intended large-scale application and Canadian deployment context
Support manufacturability at a major system scale — geometry, structural design, fabrication sequencing
Preserve coordination between engineering decisions and fabrication execution
Build with awareness of CRN/GMP documentation and accreditation requirements
Maintain fabrication traceability — material certs, weld records, dimensional records throughout
Deliver on the Q4 2026 installation timeline with execution quality the deployment demands
Treat the project as a system program — not a production run of standard components

What Was Delivered

A Custom Hydrocarbon Extraction System Built for a Landmark Canadian Installation

MRX designed and built a custom hydrocarbon cannabinoid extraction system for deployment in Canada. The system was developed for a publicly traded operator and is being installed in Q4 2026. Upon final installation and accreditation, the system is intended to become the largest CRN-accredited GMP extraction system in Canada.

Custom Hydrocarbon Extraction System

Large-scale custom extraction system designed for the application and Canadian regulated deployment — not adapted from a standard configuration.

CRN/GMP Accreditation-Aware Design

System engineered and documented in a manner consistent with CRN registration and GMP deployment expectations.

Documentation Package

Fabrication records, material traceability, and engineering documentation built throughout the fabrication process — not assembled retroactively.

Large-Scale Process Architecture

System architecture and integration design appropriate to the scope, scale, and deployment context of a major extraction installation.

Canadian Deployment Support

Designed and built for installation in Canada — supporting the customer's planned Q4 2026 deployment timeline.

Intended Flagship Status

Upon final installation and accreditation, intended to become the largest CRN-accredited GMP extraction system in Canada.

Status & Forward View

System Delivered — Installation Planned for Q4 2026

System Built

Complete

The custom hydrocarbon extraction system was designed and fabricated by MRX in Canby, Oregon.

Installation

Q4 2026

System scheduled for installation at the customer's Canadian facility in Q4 2026.

Accreditation

Pending Installation

CRN accreditation and GMP designation are pending final installation and applicable review processes.

Forward view: The project is currently positioned as a major Canadian extraction-system installation. Upon final installation and accreditation, it is intended to become the largest CRN-accredited GMP extraction system in Canada. This page reflects the status of an active project. Claims about final designation are forward-looking and contingent on completion of installation and applicable accreditation processes.

Why the Solution Matters

Custom Engineering, Fabrication Discipline, and Scale That Catalog Equipment Cannot Deliver

The value of the project was not only in the fabrication of a large system. It was in the ability to deliver a custom-engineered extraction platform aligned with scale, regulatory context, and deployment ambition — built with the documentation discipline and fabrication execution that a major regulated-environment installation demands.

Large extraction projects that treat the regulatory context as an afterthought — building first, then attempting to document and qualify — discover at the accreditation stage that the gaps they accumulated during fabrication cannot be closed without rework. Documentation that cannot be produced because records were not maintained during fabrication. Weld quality that cannot be verified because inspection was not performed and documented. Material traceability that cannot be established because heat numbers were not tracked. These are the consequences of treating a regulated-environment system program as a standard fabrication job.

Custom system architecture for the application

The extraction system was designed for this deployment — not adapted from a standard package. At this scale and regulatory context, that design specificity is what makes the system viable.

Documentation built during fabrication

Material traceability, fabrication records, and engineering documentation maintained throughout the build — not reconstructed afterward when the accreditation review requires them.

CRN/GMP context embedded in the engineering approach

Regulatory expectations shaped the engineering and fabrication process — not just the final paperwork. That is what documentation-aware execution means in practice.

System-level architecture for a major installation

The project was approached as a system program — integrating extraction system design with structural, process, and deployment considerations — not as a collection of components.

Cross-border engineering and fabrication capability

Designed and built in Canby, Oregon, for a major Canadian deployment — demonstrating MRX's ability to support large, internationally deployed systems with in-house engineering and fabrication.

Delivery quality appropriate to the customer's context

A publicly traded operator with a major regulated-environment deployment requires execution discipline, reliability, and documentation quality that matches the significance of the project.

What This Means for Similar Projects

The Real Challenge Is Engineering, Execution, and Documentation Discipline

For other large-scale extraction and regulated-process projects, the real challenge often sits in the engineering, documentation, fabrication discipline, and system-level execution — not just in the core process hardware. The larger and more regulated the project becomes, the more important it is to work with a manufacturing partner that can engineer around a complex application, fabricate at significant scale, and treat the project as a system program rather than a catalog order.

That is not a universal capability. Most fabricators can execute a drawing. Fewer can contribute to the system design, maintain the documentation discipline a regulated-environment installation demands, and deliver at the scale and quality a major deployment requires.

What separates engineered system programs from fabrication orders:

System-level design that accounts for regulatory context from the first engineering decision
Documentation discipline maintained throughout fabrication — not assembled retroactively
Fabrication execution quality appropriate to what the accreditation review will examine
Coordination between engineering, fabrication, and deployment planning as an integrated effort
Scale capability — engineering and fabrication infrastructure appropriate to the system size
Delivery discipline — reliable execution against a defined installation timeline

How MRX Approaches Large-Scale Extraction Systems

MRX approaches large-scale extraction systems as engineered process-manufacturing projects built around the application. As a GMP equipment manufacturer, MRX supports projects where system scale, process architecture, fabrication discipline, documentation awareness, and broader deployment success all matter.

Our role is not just to fabricate equipment. It is to help define and build the right process system for the way the project actually needs to be delivered — in-house in Canby, Oregon, from engineering through fabrication and delivery.

What MRX brings to a large-scale extraction system project:

Custom system engineering — designed for the application and deployment context, not adapted from catalog
GMP equipment manufacturer perspective — understanding what regulated-environment installations require
Fabrication at scale — in-house capability for large, complex custom systems
Documentation discipline — material traceability, weld records, fabrication packages built during the process
CRN/accreditation-aware execution — regulatory context embedded in the engineering approach
Engineering and fabrication coordination — in-house in Canby, Oregon, from design through delivery

Frequently Asked Questions

Large-Scale Extraction Systems in Regulated Environments

Oregon Engineered — Canby, OR

Need Help Building a
Large-Scale Extraction System?

Talk with MRX about your process objectives, scale requirements, deployment timeline, regulated-environment expectations, and system architecture needs. We can help define the right engineering and manufacturing approach from design through delivery.