Definition
In a data center liquid cooling system, the secondary loop is the server-side coolant circuit that circulates from the CDU, through supply manifolds, through server cold plates or rear-door heat exchangers, and back to the CDU for heat rejection. The secondary loop is hydraulically isolated from the facility's primary cooling loop (chilled water plant) by the CDU's heat exchanger. The secondary loop coolant is typically deionized water with corrosion inhibitors, maintained at controlled chemistry, pH, and conductivity to protect server components and satisfy OEM warranty requirements.
Secondary loop isolation is a critical design principle for two reasons. First, it prevents facility water — which may contain minerals, chemicals, or biofilm — from contacting server cold plates, which can cause corrosion, fouling, and warranty voidance. Second, it allows the secondary loop temperature, pressure, and chemistry to be controlled independently of facility conditions, enabling precise thermal management of server inlet temperatures regardless of seasonal or operational variation in facility cooling plant conditions.
Secondary loop distribution systems — from the CDU to rack manifolds and back — are a fabrication scope MRX handles as integrated assemblies. Pipe sizing, manifold design, and pressure management for the secondary loop are engineering inputs that must be matched to the CDU's pump head and the rack-level pressure drop of the server cold plates.
“The secondary loop and the primary facility loop can be connected directly to save cost.”
Direct connection of facility water to server cold plates risks warranty voidance, corrosion from water chemistry mismatches, and contamination of server hardware. Most server OEMs prohibit direct facility connection and require CDU-based isolation.
“Secondary loop temperature only matters for server comfort — not performance.”
GPU and CPU performance management (throttling) is directly tied to cooling inlet temperature. Exceeding the server's specified coolant inlet temperature causes performance reduction or thermal shutdown regardless of airflow.
MRX Manufacturing is a custom industrial fabricator based in Canby, Oregon. Talk to our engineering team about your project scope.